Lines Open: Mon - Fri 8:30 - 17:00

0800 197 65 65

0330 555 65 75

Free from UK landlines

Int'l & Mobile Friendly

Frequently Asked Questions

There aren't any questions about this product yet, please click here to ask us a question.

IKONPRO 25mm Kit IP67 0.75W SW RGB

Product code: EN59136
Catalogue page:

Click here to be the first to review this product

Write Your Own Review

You're reviewing: IKONPRO 25mm Kit IP67 0.75W SW RGB

Next day delivery subject to stock availability. Order by 3 pm.

The IkonPRO extends the Ikon recessed decking kit range, with its unique design of removable and interchangeable heads. The new Fresnel lenses improve lumen output, diffusing the spread of light evenly. Designed to be fitted and wired during the decking build stage without the heads. The supplied rubber caps protect the fitting from the elements until the decking is complete. Each individual IP67 head easily connects and can be placed into position quickly, adding the final touches to the decking design. There are three head sizes to choose from for the RGB kit.

Kit includes: 10 x 0.75W LED heads, 15W Driver, 5m Extension cable, 2 x 5 way looms & 3 Pin Plug

  • Suitable for indoor or outdoor use
  • Dimmable
  • Supplied with remote rgb control
  • Polished stainless steel & clear pc
  • Constructed from stainless steel (304) & polycarbonate
  • Super bright SMD LED technology
  • Innovative new fitting method
  • Improved lens design
  • Product Code: 59136
  • Instruction Guide Click Here

    This product is operated by a small RF remote control. It has a maximum range of 10m, though this can be affected by walls and other solid objects The remote control has four buttons. One turns the unit on and off. One allows you to step through the colours in the following sequence; yellow, white, red, green, blue, purple and light blue. The next press will make the controller step through all the colours, and another press of the button, will move through the colours gradually. The other two buttons allow you to set the brightness of the LEDs as required Max of 10 metre range for the remote control Not suitable to be used with timers or PIR sensors

  • Complete with LED driver
  • 10 x 0.75W LED module (SMD 5050) RGB (Included)
  • RGB
  • IP67
  • Proj: 1mm Dia: 25mm
  • Class 2
  • Cut hole Dia: 20mm
  • 2+3YR Extended Warranty
  • Weight: 1.3 Kg
    • Code: EN59136

    Click here to be the first to review this product

     

    Call our Helpline on 0800 197 65 65 or Click to Email Us
    Failed to Add to Basket