Frequently Asked Questions
- What zone can this heater be fitted in?
- A : This product is suitable for mounting in Zone 3 or the "SafeZone" of a bathroom.
- How much electric do they use?
- A : Based on the UK average of 14p per kWh, if it was left on for 1 hour it would cost 28p.
- Where is the air intake for this fan?
- A : At the rear of the fan. It sits about 1.5cm off the wall.
- how far from the ceiling does the WHBFH2 need to be.
- A : The heat element on the WHBFH2 is at the bottom of the fitting. Therefore the top does not get hot. I would suggest you leave 50 – 100mm distance from the ceiling to be safe.
2kw Wall Mount Pullcord Electric Bathroom Fan Heater
Next day delivery subject to stock availability. Order by 3 pm.
How Can we Help?
2kw Wall Mount Pullcord Electric Bathroom Fan Heater. Supplied by 2 manufacturers Eterna and Winterheat. The Eterna model has an IP rating of IP21, the Winteheat model has an IP rating of IP23. Stock is dependant on supply from the manufacturer at the point of sale. Please check with the sales team if you require a specific model.
- Voltage: 240v
- Wattage: 2000W
- 2 Heat settings: 1kW Low, 2kW High
- Overheat protection
- Wall mountable, complete with fixing kit
- Suitable for use in bathroom zone 3
- Pullcord operation - Cord 505mm Length
- Winter heat - Power cable length 610mm (no plug)
- Winter heat - IP rating - IP23
- Eterna - NO POWER CABLE
- Eterna - IP rating: IP21
- Height: 245mm
- Width: 227mm
- Depth: 123mm
Please contact the sales team if you require a specific model.
- Code: WHBFH2
- Page Number in Catalogue: 260
- Location: Bathroom, Indoor
- Type: Fan Heater
- Heaters/Radiators Finish: White